The Creality K1C is an upgraded version of the previous K1, boasting an impressive max print speed of up to 600mm/s and extra capabilities like an AI camera and quick swap nozzle. With its sleek design and sturdy chamber, the K1C offers a reliable and stable printing experience with unparalleled precision and accuracy. With a build volume of 220x220x250mm, the K1C enables the creation of bigger and more intricate models. Its high-precision nozzle ensures precise and detailed prints.
Similar to the K1, the K1C sports an easy-to-use touchscreen interface, making it simple for users to navigate through various operations. Additionally, with an acceleration of 20,000mm/s², the Creality K1 runs up to 600mm/s in just 0.03 seconds, making it print up to 12 times faster than other FDM printers on the market. The high-quality titanium alloy hot end allows you to easily print up to 300°C. In combination with the clog-free direct drive extruder, which has an extrusion force of 50N, you can use PLA, ABS, PETG, TPU, PA, and PC, among others, on the K1C. Effortlessly switch to a hardened stainless steel nozzle to print abrasive filaments, such as PA-CF, without any problems.
The K1C also comes equipped with a filament run-out detection system, which automatically pauses the printing process when the filament runs out, preventing any potential errors or wasted prints. Furthermore, its resume printing function allows users to continue printing from where they left off in case of power outages or interruptions.
Overall, the Creality K1C is an excellent choice for both beginners and enthusiasts alike. Its user-friendly interface and reliable performance make it a reliable and efficient 3D printer for various printing needs.
The K1C boasts an clog-free extruder kit, ensuring enhanced reliability during printing. With a bolster spring and ball plunger, the extruder maintains a strong grip on the filament, providing consistent and clog-free extrusion for over 1000 hours.
Featuring a tri-metal "Unicorn" nozzle with a steel-tipped copper build, integrated with a titanium alloy heatbreak, the K1C allows for easy one-handed swapping. This design prevents heat creep and ensures durability, providing smooth feeding and great durability.
Powered by a CoreXY motion structure, the K1C achieves an astounding maximum printing speed of 600mm/s. This speed is complemented by a max acceleration of 20000mm/s², making it a true champion in the realm of 3D printing.
Unleash your creativity with a 3D printer that supports a wide range of filaments. The K1C's 300℃ hotend and hardened steel nozzle tip make it compatible with high-temperature and wear-resistant filaments, including carbon fiber variants.
Equipped with an AI camera, the K1C provides active error alerts, real-time monitoring, and time-lapse filming, ensuring a seamless and worry-free printing experience.
The K1C opens new possibilities with its compatibility with carbon fiber-filled filaments. Benefit from the mechanical strength and dimensional stability of materials like PET-CF and more, making it ideal for a variety of applications, from jigs and fixtures to prototypes.
Auto Calibration with One Tap
Experience hassle-free operations with the K1C's auto-calibration feature. With just one tap, the printer performs self-tests, auto-leveling, auto Z offset adjustment, and input shaping tests, eliminating the need for tedious manual leveling.</p
The built-in AI camera adds an extra layer of intelligence to your 3D printing experience. Detect errors, monitor progress, and enjoy the convenience of remote monitoring through Creality Print or Creality Cloud APP.
Inheriting the lightweight and agile CoreXY motion structure, the K1C promises not only speed but also high print quality. With a silent mode option, the printer operates at a noise level as low as 45dB, ensuring a quiet printing environment.
The frame adopts bigger parts made by integrated die casting. With fewer seams, it looks neat and becomes utterly sturdy.
The glass sides and the acrylic lid form a stylish thermal enclosure, and they are transparent to reveal what's going on inside.
The K1C utilizes an active carbon filter to purify compounds and particles, offering a pleasant and clean printing environment.
The K1C incorporates various features for enhanced user experience, including pre-installed damping pads, a reliable damper hinge, an anti-shatter film, a reinforced cable chain, and a silicone wiping strip, among others.
Enhance the capabilities of your K1C with quality optional accessories, including Creality Hyper Filaments, Creality Space Pi Filament Dryer, and a Coarsely Textured PEI Plate for better adhesion.
Based on Klipper, Creality OS empowers users with advanced functions such as linear advance and input shaping. Enjoy the freedom to customize or join the open-source community for more exploration.
Creality Print features smart cooling, optimal retraction, slim tree supports, and a readily accessible 3D model library, offering a seamless 3D printing experience.
Reliable Extrusion
Clog-free Extruder Kit
Easy Maintenance
Quick-swap Tri-metal Nozzle
High Efficiency
600mm/s Max Printing Speed
Intelligence
Observant Al Camera
Wide Uses
Carbon Fiber-Filled Filaments Supported
1st print, 2nd print, until you lose count. K1C always has your back.
The extruder of K1C is enhanced with a bolster spring and a ball plunger. It grips on filament tightly without slackening off.
The durable steel-tipped copper nozzle is integrated with a titanium alloy heatbreak. It blocks heat creep and can be swapped super easily.
1st: Hotend Fan for Minimal Heat Creep
Hardly any heat creeping up from hotend to the extruder. It prevents pre-mature filament melting from messing up the feeding flow.
2nd: Part Cooling Fan for Instant Hardening
A strong wind hardens the fresh extrusion via a special air duct. lt catalyzes layer bonding and refines layer texture.
3rd: Auxiliary Fan for Overall Print Quality
An extra fan is on the chamber's side to assist the model cooling. It minimizes string and warping for bridges and overhangs.
The weight of printhead fans is dynamically balanced, so they are less likely to wobble, minimizing ringing or ghosting.
K1C can make use of CF filaments, which are widely used in industrial printing for their mechanical strength and resistance to wear, deformation, and aging.
300° Hotend + Hardened Steel Nozzle Tip
Going well with high-temp and wear-resistant filaments.
PEI Flexible Plate
Sticky to various materials, able to release 3D models with a slight bend.
Enclosed Design
Creating a constantly high-temp environment to forge stronger prints.
Highly automated except for a few taps. K1C is simple to use just like a smartphone.
K1C is well assembled and tested before shipment. After unboxing, it is ready for plug and play. The boot-up guide is similar to that of a new smartphone.
Give it a tap and walk away. The auto-calibration gets everything ready for you. Bid farewell to the frustrating leveling test with paper.
The built-in Al camera can watch over the printing, and will actively alert you when an error occurs*. Also great for video monitoring and time-lapse filming.
*Active alert and video monitoring require a connection to Creality Print or Creality Cloud APP.
K1C inherits the lightweight and agile CoreXY system of KI. It offers a thrilling speed while retaining the print quality.
Max Speed: 600mm/s
Max Acceleration: 20000mm/s2
The frame adopts bigger parts made by integrated die casting. With fewer seams, it looks neat and becomes utterly sturdy.
The glass sides and acrylic lid form a stylish thermal enclosure. They are transparent to reveal what's going on inside.
K1C employs an active carbon filter to purify compounds and particles arising from molten filaments. Be reassured to stay day and night with it in the same space.
K1C allows you to opt for a speed & noise level for printing. In silent mode, it sounds like turning pages in a book. No more distraction from work or rest.
Silent Mode ≤45dB
No more worry when an individual print fails in batch printing, as you can exclude the partial failure from the batch.
Pre-installed Damping Pads - Fewer vibrations of the 3D printer.
Silicone Wiping Strip - Cleaner to wipe the nozzle tip.
Anti-shatter Film - Lower odds of glass shattering.
Reinforced Cable Chain - Less likely to get loose, and more durable.
Reliable Damper Hinge - Controlled door movement, less door slamming.
(Offered as a 3D model file)
Side Spool Holder - Filament becoming more accessible and visible.
K1C enjoys a lot of quality optional accessories. Its hardware is open-source, so you can DIY as you like.
Creality OS enables many advanced functions such as linear advance and input shaping. You can customize it or join the open-source community to explore more.
It features smart cooling, optimal retraction, and slim supports, and allows users to manage a 3D print farm efficiently. Also, for the first time, it integrates a readily accessible 3D model library.
A diverse, convenient, and interesting all-in-one 3D printing platform.
3D Model Library
Get a myriad of 3D Models in diverse categories.
Cloud Printing
Slice, print, and monitor from the cloud.
Online Community
Interact with other 3D printing hobbyists.
| General | Brand: Creality Type: 3D Printer Model: K1C Color: Grey |
| Specification | Printing Technology: FDM Build Volume: 220x220x250mm Printing Speed: ≤600mm/s (Test with Hyper PLA) Acceleration: ≤20000mm/s2 Printing Accuracy: 100±0.1mm Layer Height: 0.1-0.35mm Extruder: Clog-free direct drive extruder Filament Diameter: 1.75mm Nozzle Diameter: 0.4mm (compatible with 0.6/0.8mm nozzle) Nozzle Temperature: ≤300℃ Heatbed Temperature: ≤100℃ Build Surface: PEI flexible build plate Leveling Mode: Hands-free auto-leveling File Transfer: USB drive, WiFi Display Screen: 4.3" color touchscreen Al Camera: Yes Al LiDAR: Optional Power Loss Recovery: Yes Filament Runout Sensor: Yes Input Shaping: Yes Lighting Kit: Yes Sleep Mode: Yes Rated Voltage: 220-240V, 50/60Hz Rated Power: 350W Supported Filaments: ABS, PLA, PETG, PET, TPU, PA, ASA, PC, PLA-CF, PA-CF, PET-CF Printable File Format: G-Code Slicing Software: Creality Print, Cura 5.0, and later version File Formats for Slicing: STL, OBJ, 3MF UI Languages: English, Spanish, German, French, Russian, Portuguese, Italian, Turkish, Japanese, Chinese |
| Weight & Size | Product Weight: 12.4kg Package Weight: 16kg Product Size(L x W x H): 355*355*482mm Package Size(L x W x H): 428*428*567mm |
| Package Contents | 1 x 3D Printer 1 x Touch Screen 1 x Filament 1 x Wrench And Screwdriver 1 x 1.2mm Through Pin 1 x Door Handle Kit 3 x Shelf Screws M3*18 1 x Spade 1 x USB Flash Drive 1 x Quick Guide 1 x Shelf Screw M3*12 1 x Tube 1 x Power Cord 1 x After-Sales Service Card 1 x Scissors 1 x M6 Socket Wrench 1 x Air Filter Kit |
| Total Rate： | Review Summary: 0 reviews | Write a review |
